GYS 068759, Руководство по эксплуатации

Страница: 12 / 48

12
Operating manual
GYSPACK PRO 800
Translation of the original
instructions
The charge of the internal batteries
does not start (the charge LED re-
mains green when first connected to
the mains).
The cigarette lighter plug is not
correctly plugged to the socket of the
machine.
Check the cigarette lighter connection.
The fuse of the cigarette lighter sock-
et has melted.
Replace the fuse of the cigarette light-
er socket by unscrewing its end.
The charger red LED flashes during
the charge.
The internal battery is damaged and it
cannot be recharged.
Contact the GYS after sale service to
replace the battery.
After a day of charge, the end of
charge indicator does not activate.
The internal batteries are damaged
and cannot be recharged.
Contact the GYS after sale service to
organise a replacement of the batter-
ies.
In external 12V power source mode,
the booster no longer delivers power.
The internal thermal protection cir-
cuit-breaker has cut the circuit.
Disconnect the external device
connected to the machine and wait
for the circuit-breaker to reset itself
automatically.
The voltage display does not switch
on.
The internal battery is discharged. Charge the unit, and try again after
the charge is complete.
NO WARRANTY ON THE BATTERY
The battery is an operating element and its life depends on its maintenance. After each use of this start booster, it is
imperative to charge the internal battery. Storage in places with high temperatures considerably reduces the life of the
battery. In case of prolonged non-use, it is strongly recommended to recharge the battery before use. As a general
rule, we recommend leaving the product connected at all times to keep the battery at peak performance.
This product is equipped with a high performance battery which, if not maintained properly, can deteriorate irreversibly
over time.
As its preservation depends on its use, the battery of the GYSPACK PRO 800 is excluded from the warranty.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported