GYS 031425, Руководство пользователя, Страница: 13 / 56

13
PROGYS 180A
MADE IN FRANCE
EN
MMA WELDING (ELECTRODE)
• Apply the usual welding rules.
• Leave the machine connected to the power supply after welding in order to let it cool down.
• Thermal protection : in case of over-heating the thermal protection light turns on. The cooling time is about 2 to 5 min
according to external temperature.
Advice :
• Respect welding polarities and currents indicated on the electrode packaging.
• Remove the electrode from the electrode holder when you do not use it.
• Leave the ventilation grill free to allow in/out air circulation.
TIG WELDING WITH INERT GAS
These machines can weld DC TIG with scratch start (100/130/180)
TROUBLESHOOTING
Symptoms Causes Remedies
The 2 indicators are on, the machine
does not deliver any current.
The thermal protection has switched
on.
Wait for the end of the cooling cycle.
The green indicator is on, but the
machine does not weld.
Fault with earth clamp/cable connec-
tion.
Check the connections
The product is under voltage, you are
feeling tingling when touching the
machine's body.
The earth contact is faulty.
Check the plug and the earth of your
installation.
The machine welds poorly. Polarity error (+/-).
Check the polarity (+/-) recom-
mended on the electrode box.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported