25
PLASMA CUTTER 85A / 125A
EN
N°7
Shield
Protective shroud
Tailpipe
Diffuser
Electrode
Tube
Torch
AUTOMATIC TORCH SETUP (REF. 040014)
1 - ASSEMBLY
Depending on the type of cutting table, it may be necessary to disassemble the torch to install it properly. If the rack of your cutting table is wide
enough for you to pass the torch through it without disassembling the torch, do so and then attach the torch to the height adjustment device accor
-
ding to the manufacturer’s instructions.
If you need to disassemble (and then assemble) the Z Auto torch, please follow these steps :
1
2
2
1
2
1
Unscrew the 2 Torx
®
screws.
Firmly hold the
protective shroud (1)
and unscrew the torch
(2).
The shroud is
disconnected from
the body
Insert the torch's body in the
cutting table's conduct
Firmly hold the protective shroud
(1) and screw the torch together(2).
Screw the 2 Torx
®
screws.
2 - CHOICE OF CONSUMABLES
The Z auto torch uses «unprotected» consumables, a small distance distance (2 to 3 mm, between the torch and the metal).
5 tailpipe calibers available
To optimise the cut,it is important to choose the right tailpipe caliber according to the machine’s settings.
Power
Tailpipe
Ref.
Process
A current that is too low leads to low cutting performance.
A current that is too high for the tailpipe leads to early dete-
rioration.
25-45A
40A
039759
Auto cut
45-65A
60A
039766
65-85A
80A
040038
85-115A
110A
039667
115-125A
130A
039650
Gouging is impossible with an automatic torch.
