background image

20

GX8.0 CROSSTRAINER

WARM UP AND COOL DOWN ROUTINE

A good exercise program consists of a warm-up, aerobic exercise, and a cool down. Do the entire program 

at least two to three times a week, resting for a day between workouts. After several months you can increa-

se your workouts to four or five times per week.

AEROBIC EXERCISE is any sustained activity that sends oxygen to your muscles via your heart and lungs. 

Aerobic exercise improves the fitness of your lungs and heart. Aerobic fitness is promoted by any activity 

that uses your large muscles eg: legs, arms and buttocks. Your heart beats quickly and you breathe deeply. 

An aerobic exercise should be part of your entire exercise routine.

The WARM-UP is an important part of any workout. It should begin every session to prepare your body for 

more strenuous exercise by heating up and stretching your muscles, increasing your circulation and pulse 

rate, and delivering more oxygen to your muscles.  ‘

COOL DOWN at the end of your workout, repeat these exercises to reduce soreness in tired muscles.

 

HEAD ROLLS 

Rotate your head to the right for one count,

 feeling 

the stretch up the left side of your neck, then rotate 

your head back for one 

count, stretching your chin 

to the ceiling and letting your mouth open. Rotate 

your head to the left for one count, then drop your 

head to your chest for one count. 

SHOULDER LIFTS 

Lift your right shoulder toward your ear for one 

count. Then lift your left shoulder up for one count 

as you lower your right shoulder. 

Содержание GX8.0
























Отзывы: