Gymna PULSON 200, Руководство пользователя

Страница: 26 / 56

Pulson 200
27
Reset menu
• Reset working hours : Set the number of working hours of an US head to
zero.
•
Reset programs 1-50
: This restores the standard settings of the standard
programs. See §4.4.4.
•
Erase total memory
: Restores the standard settings of the standard
programs and of the edited programs.
Press again to confirm.
Stopping time with bad US contact
On
: The treatment stops during a bad contact of the US head.
Counter working hours (hours, minutes, sec.)
The time that the accessories for ultrasound therapy have been in use. For
this, the output of the channel must have been higher than zero.
4.5.3 Setting the sound
1. Press for 5 seconds.
2. Select
Sound settings
,
3. Change the desired sound setting.
See §4.2.
End of treatment
On
: A sound signal will be heard at the end of the treatment.
Pressing a key
On
: A sound signal will be heard every time a key is pressed.
Beep volume
(min.1, standard 5, max.10)
The volume of the sound signals.
US bad contact
On : A sound signal will be heard if the US head does not make good contact
with the skin.