Gymna PULSON 200, Руководство пользователя

Страница: 10 / 56

Pulson 200
11
2 I
NSTALLATION
2.1 Receipt
1. Check whether the equipment has been damaged during transport.
2. Check whether the accessories are intact and complete. See §7.6.
• Inform your supplier of any damage or defects by no later than within
3 working days after receipt. Report the damage by telephone, fax, e-
mail or letter.
• Do not use the equipment if it is damaged or defective.
2.2 Placing and connection
1. Place the equipment on a horizontal and stable base.
• Keep the ventilation openings at the bottom and rear of the
equipment free.
• Do not place the equipment in the sun or above a heat source.
• Do not use the equipment in a wet area.
2. Check whether the mains voltage that is stated on the rear of the
equipment corresponds with the voltage of your mains supply. The
equipment is suited for a nominal mains voltage from 100 V to 240 VAC /
50-60 Hz.
3. Connect the device to an outlet with protective earth terminal.
2.3 Performing the functional test
1. Switch the equipment on with the switch at the rear of the equipment.
2. When the equipment is switched on, it automatically performs a test.
2.4 Setting contrast and selecting language
1. Press for 5 seconds The
System setting
menu appears. See §4.5.
2. Press next to
Contrast
, 1
st
key from the top.
3. If necessary, change the contrast with and .
4. Press next to
Language
.
5. If necessary, change the language with and .
6. Press to return to the start menu.