GxT, Inc. Ferret 95, Руководство оператора

Страница: 5 / 24

5
Function Buttons
Press this button to turn the multimeter on and off.
Press this button to set configure the RPM to read in 2
Cycle or 4 Cycle mode. Distributorless Ignition Systems
should be set to 2 Cycle mode to correctly read RPM.
Press this button to freeze and unfreeze the display.
Pressing the Min/Max button while in certain tests
will have set up the meter to capture minimum and
maximum readings. Continue to press this button to
view the min and max readings on the top display. Press
any other test button to stop capturing minimums and
maximums.
Press the Range button to manually set the range of
most tests. Press any other test button to return to auto
ranging.
Press the REL Zero button to zero out the reading on the
bottom display. Use this button to zero the low and high
amps probe, or zero out the ohm meter. This function
can also be used to set a base measurement as zero.
Then all readings will be +/- from the base reading.
ON
OFF
2C/4C
HOLD
Min
Max
Range
REL
Zero