GxT, Inc. Ferret 95, Руководство оператора

Страница: 4 / 24

4
Battery Replacement / Optional Battery
When the LOBAT indicator comes on the display, you will need
to replace the two 9 Volt batteries. Remove the 4 screws holding
the boot on the unit, and remove the boot. Replace both batteries
and reattach the boot.
To replace the battery, remove the 4 screws holding the protective
boot to the front panel. Remove the front panel. On the back
of the display board located at the bottom of the board is the
primary battery location. This position must be filled with a full
sized 9 volt battery. A second position towards the top of the
analog board will hold a second 9 volt battery. This is an auxiliary
battery that is not required for use. However, for extended battery
life when connected to a PC, or extended use of the backlight a
second battery is recommended.