GWT PR 1713/00, Руководство по эксплуатации

Страница: 36 / 56

Batching
PR1713 Operating manual
Seite 34
The component name can be selected by pressing 'enter'.
When pressing key 'enter' again, the other parameters are al-
ways displayed right beside the line number.
All parameters are always called up successively.
1) Component name
2) Set-point
3) Recipe total mode
4) Set-point scaling
The setpoint of the D3 component is a value in seconds and
has to be entered without a unit.
After completing the last parameter, the next line number is
always displayed automatically, so that a quick survey of all
data of a recipe is possible.
Note: Detailed explanations for the 'Total mode' are located in section 'Recipe total'. The
'Calculation mode' is described in section 'Setpoint scaling'.
•
An entry can be completed by pressing 'enter'. The changes are stored. The next parameter of the
recipe line is displayed.
Tart18
! !
2
! !
Flour-3a
Calculation mode
0
Total mode
1
Line setpoint
52.4
kg
Select component
! !
Sugar1
! !