GWT PR 1713/00, Руководство по эксплуатации

Страница: 13 / 56

PR1713 Operating manual
Operating concept
Page 11
2.3.3 Editing with alphanumeric characters
In the alphanumeric entry mode, a cursor blinks in the entry field. Unless already active, this mode is
accessible by pressing a key from the right keypad of PR1713. Then, the softkeys are without im-
portance.
The arrow keys from the right keypad are used to shift the cursor. Entries and deletings act in
the cursor position.
An alphanumeric key has more than one
significations. After pressing for the first
time, the relevant first signification, e.g.
'A' is displayed in the cursor position. After pres-
sing for the second time, e.g. 'B' instead of 'A' is
displayed; 'C' is displayed after pressing for the third time, etc. After the last signification, the first
one is displayed again. The entry of a character is completed by pressing another character key, or the
arrow keys. The character is removed by pressing key 'del'.
If only numeric values are required for an entry,
letters are not selectable via the editor. Therefore,
values such as 555 can be entered only by pressing
the key successively three times and without using
the arrow key. A decimal point can be entered with
the comma key. If a value has a polarity sign, a pola-
rity sign can be entered by pressing the comma key
in the extreme left position.
With weight values, the unit can be scrolled using
the 'more' key. (g, kg, t, lb)
The single character editor can edit a longer cha-
racter field than the space available for the editor. In
this case, the display field is shifted right and left. In
the last position, the partial character display is re-
presented by special character '
…
'.
The 'backspace' key deletes the character before the cursor.
An entry can be completed with 'enter'. The changes are stored. The operation is continu-
ed at the next higher level..
The old value from before the change is displayed with 'quit'. By pressing 'quit', the ope-
ration is continued at the next higher level.
Parameter name
name field
…
The multiple key significations are:
# " ( ) = $ ? ! % 1
A B C a b c 2
D E F d e f 3
G H I g h i 4
J K L j k l 5
M N O m n o 6
P Q R S p q r s 7
T U V t u v 8
W X Y Z w x y z 9
. - + * /
(special characters dependent of
country) 0