The following channel parameters can be set or changed:
●
Channel No.: Select the channel that will be edited.
●
Channel Name: Input a name for the channel.
●
Video Mask: Select to enable or disable this feature. If enabled, up to four areas can be selected not to be displayed in
the channel video, recording, or both. The selection interface functions the same as setting a motion alarm area.
Not
all models support this function.
●
Time & Channel Name Display: Select to display the time and name in the channel video.
●
Video Adjust: Left click Video Adjust to open the video adjustment interface. Either left click the arrows or left click
and drag the slider to adjust the brightness, contrast, and saturation of the channel.
●
CH Name Pos. & Time Pos.: Left click to enter the position adjustment interface, and select a desired position from
the drop-down menu.
Some models do not have a separate menu for adjusting the position.
●
Save: Left click to save the settings.
5.7.3.2 Display Sequence
Go to [Main Menu]
→
[Settings Management]
→
[Output]
→
[Sequence] to enter the video sequence interface.
This interface may look slightly different on differing models but its functionality remains the same.
Video sequencing will only occur when the system is locked down.
To enable video sequencing follow these steps:
●
Sequence: Select to enable or disable the feature.
●
Channels: Select which channels to video sequence.
Not all models have this option.
●
Sequence period: Input the time in seconds between each sequence change. The time can be between 3 and 60
seconds.
●
Layout: Select the desired display layout and where channels are displayed in the layout.
●
Save: Left click to save the settings.
Official Website:
www.gwsecurityusa.com
Email:
Business Hours: Mon-Fri 9am to 5:30pm PST/PDT
Tel: 626-350-0555
Содержание GW-NVR2208E-8P
Страница 1: ...Network Video Recorder User Manual...
