5.6.1.1 Adding via Manual Add
Left click Manual Add to enter the manual addition interface.
To manually add a camera follow these steps:
●
IP CH: Select the channel number to assign to the camera.
●
Dev Type: Device type should automatically default and not be selectable under normal conditions.
●
IP address: Input the IP address of the camera.
●
Protocol (if multiple options): Select the desired protocol type.
●
Port: Input the desired port. The default is 80.
●
Username & Password (if required): enter the username and password of the camera.
●
Add: Left click Add to finish and add the camera.
5.6.1.2 Adding via the “Plus” Icon
Left click the
icon of an available camera to add it to the system. If the camera has a
icon in the status box it requires
input of the camera’s username and password in order to complete the addition. If the camera has a
icon in the status box
it does not require a username and password.
5.6.1.3 Adding via Smart Access
Left click Smart Access and the system will automatically add all IP Cameras to the system in the same order shown in the
available cameras section. The order of available cameras can be changed before adding them by left clicking any of the list
parameters (IP Address, Resolution, etc.).
5.6.2 Removing IP Cameras
Only paired cameras can be removed. All removed paired cameras will be moved to the available camera list. Cameras can be
removed one by one or all at once.
●
Left click the
icon of a paired camera and select Yes to remove it.
●
Left click Delete All and select Yes to remove all paired cameras.
5.6.3 Other Options
IPC Management also includes the following features and options.
●
Preview: Hover the mouse over the
icon to pop-up a preview window of the available camera. (This function is
only available on cameras that support snapshots.)
Official Website:
www.gwsecurityusa.com
Email:
Business Hours: Mon-Fri 9am to 5:30pm PST/PDT
Tel: 626-350-0555
Содержание GW-NVR2208E-8P
Страница 1: ...Network Video Recorder User Manual...
