PSB-2000 Series User Manual
86
Using the Sequence Function
Description
The section ―Sequence
F
unction‖
(page 61) shows
how to execute a sequence program on the power
supply when equipped with the optional interface
board. The PSB_Sequence_203 software is used to
create a program in advance via the optional
interface board. See the Sequence Function section
on page 61 for details. The PSB_Sequence_203
software can be downloaded at the GW Instek
website.
Procedure
1.
Write a sequence program through the
interface board. See page 61
2.
Activate the sequence function as shown in the
Sequence Function menu on page 61.
3.
Execute the sequence operation with the
PRESET
key(s).
Each
PRESET
key has two functions. The
function of the
PRESET
keys and the
OUTPUT
key are different when used in the sequence
mode compared to when they are in the
normal operating mode.
Below is a description of the function of each
of the preset keys and the OUTPUT key when
in the sequence mode.
Normal Mode
Sequence Mode
PRESET 1
Starts or pauses the sequence
program. (
)
PRESET 2
Skips to the previous step number.
( ) (when paused)
PRESET3
Skips to the next step number in
the sequence. ( ) (when paused)
All manuals and user guides at all-guides.com
