GW Instek GSP-830, Руководство пользователя

Страница: 29 / 181

QUICK REFERENCE
29
Set Trigger Frequency
Trigger → F5
Run Trigger (in Single/Continuous)
Trigger → F6
Display
Change Dimmer Level
Display → F1
Show Display Line
Display → F2
Clear Title Display → F3 → F1
Enter Title
Display → F3 → F2 to F4
Show Title
Display → F3 → F5
Activate Split Window Display → F4 → F1 (Upper), F2 (Lower)
Alternate Upper/Lower Sweep
Display → F4 → F3
Switch Split Display to Full Screen
Display → F4 → F4
File
Select Copy Source File
File → F1 → F1 → F1 to F5
Select Copy Destination File
F2 → F1 to F5 (After Selecting Source)
Edit Copied File Name
F3 (After Selecting Destination)
Copy Selected File
F4 (After Selecting Source/Destination)
Select File for Deletion
File → F2 → F1 → F1 to F5
Delete Selected File
F2 (After Selecting File)
Rename File
File → F3 → F1
Confirm New File Name
F2 (After Renaming File)
Save Display Image to USB Drive
File → F4 → F1 → F2
Rename File in USB Drive
File → F4 → F1 → F1
Select System Code for Update File → F5 → F1 → F1
Select Language for Update
File → F5 → F1 → F2
Update System File from USB Drive
F2 (After Selecting File)
Preset
Recall Factory Installed Settings
Preset
System
Save Setup
System → F1 → F1 or F2 → F3
Recall Setup System → F1 → F1 or F2 → F4
Select GPIB Address
System → F2
Show RS-232C Configuration
System → F3 → F1 to F4
Activate Auxiliary Signal System → F4