GVD M3 series, Руководство пользователя

Страница: 18 / 197

Chapter 2 Installation
2-8 HD NVR User Manual
NOTE: How to remove and add a hard drive?
Remove the hard drive from the HD NVR:
1.
Push the blue tray switch of the desired HDD tray, and the door is opened.
2. Pull the tray out completely.
3.
Loose the fixed screws and remove the hard drive.
Install the hard drive
1. Put the new or repaired hard drive in the HDD tray, and lock the fixed screws.
2.
Insert the HDD tray to the HD NVR Enterprise, and push the tray to the end of the track.
3. Close the tray door. When the door is closed, and the user will hear ‘ Clip! ’ .
NOTE: The default IP address of the NVR is
192.168.0.10. Contact your network administrator
and update the IP address of the NVR.