GVD M3 series, Руководство пользователя

Страница: 128 / 197

Chapter 5 Alarm & Event Mode
5-2 HD NVR User Manual
5-1-1 Deal with The Alarm
All generated alarms will be added to the alarm list. When the pop -up function is
triggered, the alarm will be shown in the configured pattern layout and keep blinking
for several seconds on the screen. For detailed information about the alarm pop-up
configuration, see section 6-3-3 ‘ Alarm Rule ’ .
In the alarm mode, the life cycle of alarm is divided into three stages: active, pending,
and complete. When an alarm is newly generated by the system, it is in the ‘ active ’
stage and will be listed in the alarm list . An active alarm has not been neither
reviewed nor taken any actions .
When the alarm has been reviewed by the user but no action (for example, put some
comments) has been taken , or the cause of the alarm has been automatically removed
(for example, a video loss alarm has been automatically re -connected), it is in the
‘ pending ’ stage. The pending alarm can be previewed by the users at any time.
Double click the pending alarm in the alarm list, and an acknowledge dialog will
appear.
The acknowledge dialog allows the user to take some actions, such as input some
comments in the dialog. When the action is taken, the user can click the ‘ Ack ’ button
in the acknowledge dialog. The alarm is in the ‘ complete ’ stage. The alarm will be
removed from the alarm list.
TIP: To search all completed alarms, run the ‘ Search
Alarm ’ function.