17
EN
Start sewing
1. Press the needle position button once or
twice to ensure the needle is lifted.
2. Lift up the presser foot.
3. Feed the fabric under the presser foot.
Pull the top thread and bobbin thread
towards the back of the machine under
the presser foot, until they are about
15cm (6") long.
4. Press 6-8 times of the Needle Position
Button to fix the fabric.
Note: Do not press the button too
fast,otherwise there will be alarm from
machine.
5. Press the foot controller carefully and start sewing.
6. When you have finished, remove your foot from the
foot controller, then the sewing machine will stop.
7. Lift up the presser foot, pull the fabric and threads
about 15cm backwards, then cut threads with the
thread cutter from back to front.
8. Observe the finished fabric carefully to check the
conditions of top thread and bobbin thread. If the
bobbin thread appears on top side of fabric, please
adjust the top thread tension.
Reverse sewing
When press the reverse sewing lever, the machine will sew
reversely (feed the fabric backwards).
Needle
position
button
2
5
8
Top thread
Bobbin thread
Reverse stitch
