manualshive.com logo in svg

guth RA 45, Руководство по эксплуатации

Поделиться
Скачать
guth RA 45 Скачать руководство пользователя страница 9

3.3 Built-in safety systems {XE "Safety systems"}

-

The mixer is equipped with a one or three-phase, three or fivewire supply system with current-carrying N and

separate earth conductor

 (with yellow/green insulation).

This operating manual is an integral part of the mixer and must be kept readily at hand for the
operators at all times.
The safety instructions in it must be followed.
Also pay attention to the protective motor switch built into the motor as safety system;
see separate operating manual.

It is strictly forbidden to render any of the safety devices inoperative.

3.4 Safety precautions{XE "Safety precautions"} (to be carried out by the customer)

The customer must
- 

instruct his operating and maintenance personnel in the use of the mixer and its safety devices and

-

ensure that the safety precautions are being adhered to. This operating manual is an integral part of the
mixer and must be kept readily at hand for the operators at all times.

The work described in this operating manual is explained in such a way that

- 

the chapters 

Transport, Operation

 and 

Installation

 can be

understood by a trained worker and

- 

the chapters 

Maintenance

 and 

Troubleshooting

 by a qualified technician.

Work described in the chapters 

Maintenance

 and 

Troubleshooting 

may only be carried out

by 

qualified

 technicians.

Definitions based on EN 60204-1.

Trained worker {XE "Trained worker"}

- 

A person familiarized with and, if applicable, trained in his particular duties by a qualified technician and instructed
in the potential dangers in the event of improper conduct and in the necessary safety devices and safety precautions.

Qualified technician{XE "Qualified technician"}

- 

A person who, on account of his technical training, know-how, experience and knowledge of relevant standards, is
able to assess the work assigned to him and identify potential dangers.

© Copyright 

Page 

| 03

Distribution and reproduction of this document, commercialisation and publication of its content is strictly forbidden. Contravention
is liable to payment of damages.  All rights reserved.

Flow Components

Capital Equipment

Engineered Processing Units

Содержание RA 45





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды