18
BATTERY
•
In order to be able to use the remote control, you first have to insert the battery in it.
To do so:
•
Open the battery
compartment.
•
Insert the CR2032 battery,
making sure you respect the +
and – polarity.
•
Close the compartment.
•
When you decide to throw away the
appliance, make sure to remove the
battery and to dispose of it in an
ecological manner by handing it in
a place intended for this end.
NOTE: the remote control can be stored in the foreseen space located on the back of
the appliance.
Caution: if you don’t use your remote control for a long time, it is recommended to
remove the battery because it could run.
USE
Connect the heater with the base before the first use.
When the appliance is switched on for the first time, a slight smell may be emitted.
Please ensure sufficient ventilation. This smell will disappear very quickly.
The heater may be operated by the manual controls located on the heater or by your
remote control.
1.
Place the heater on a firm level surface.
2.
Set the main power switch to ‘0’. Plug in the appliance. Set the main power switch
to position ‘I’. A beep will sound and the
indicator will come on indicating that
there is power to the unit. The heater is ready for use.
3.
Turn the heater on by pressing the
button of the remote control or control panel.
The unit will display the current room temperature.
4.
Upon turning the heater on, the unit will be in the fan mode.
5.
Pressing the
button at this point will set the heater into 1300W mode (the
display will show ).
6.
Pressing the
button a second time will set the heater into 2000W mode (the
display will show ).
