Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
Back cover page (last page)
Assembly page 14/32
Fax +32 2 359 95 50
Never use the appliance near inflammable or
explosive materials.
Do not insert any objects through the grille or into
the interior of the appliance.
Do not use double adapters or other appliances
to connect with the heater.
CAUTION – Some parts of this product can
become very hot and cause burns. Particular
attention has to be given where children and
vulnerable people are present.
This symbol indicates: WARNING: in order to
avoid overheating, do not cover the appliance.
(*) Competent qualified electrician: after-sales department
of the producer or importer or any person who is qualified,
approved and competent to perform this kind of repairs in
order to avoid all danger. In case of need you should return
the appliance to this electrician (www.ggv-service.de).
POSITIONING OF THE APPLIANCE
The heater should only be operated at a minimum distance of 50cm from any wall or other
object. Position the air flow in order to optimise the heating of the room. Avoid corners, small
volumes, floors and ceilings.
USE
When the appliance is switched on for the first time, a slight smell may be emitted. Please
ensure sufficient ventilation. This smell will disappear very quickly.
1.
Place the heater on a firm level surface.
2.
Turn off all the controls of the heater, and then plug the heater power plug directly into a
standard AC outlet. Be sure the plug fits tightly into outlet.
3.
Rotate the thermostat control knob clockwise to high position.
4.
Set the selector switch to the desired position. Use HIGH setting to raise the temperature
quickly. For reduced output, flip the selector switch to LOW.
5.
Slowly turn the thermostat knob counter clockwise until the heater shut off. The heater will
automatically maintain this temperature. For a lower temperature, rotate the knob further
counter clockwise. For a higher temperature, rotate the knob clockwise.
