GUTFELS CLEAN 3010, Инструкция по эксплуатации

Страница: 27 / 80

EN
Page | 27
Replacing the HEPA filter
The HEPA filter is used to filter out
viruses, respirable dusts, dust mite eggs
and excretions, pollen, smoke particles,
asbestos, bacteria, various toxic dusts
and aerosols from the air.
Fig.14: Press the outlet latch to open
the outlet plate.
Fig.15: Remove the outlet HEPA filter.
Fig.14
Fig.15
Fig.16: Open the cover to be able to
remove the dust filter.
Fig.17: Remove the dust filter.
Fig.18: Remove the dust chamber and
tap it out to remove the dust. If
necessary, you can rinse it under a tap.
Fig.16
Fig.17
Fig.18
1. Clean the cover, assembly, outlet
sponge and dust chamber in
water without detergent and dry
before use.
2. Attach the dust unit to the
chamber cover and ensure that
three protruding cubes are in the
grooves of the dust container.
3. Turn the dust unit in the direction
of the marking on the chamber
cover.
4. Mount the chamber cover
assembly and the dust chamber
externally according to the
marking.
Insert the dust chamber assembly into
the machine. And in this process, you
should first put the chamber in the
correct position, and then press the
handle of the dust chamber. If there is a
cackling sound, it means that the
process was successful.
NOTE!
DANGER DUE TO
INCORRECT OPERATION!
The HEPA filter must be replaced every 6
months.
Motor protection filters must be replaced
every 12 months. A replacement filter
set consisting of:
1x
HEPA filter,
1x dust filter
is available at www.ggv-service.de