Connector pin-outs
7.3 Break-out Box – Sensor connector
This is a standard 26-pin “military-specification” plug,
conforming to MIL-DTL-26482 (formerly MIL-C-26482).
A typical part-number is 02E-16-26P although the
initial “02E” varies with manufacturer.
Suitable mating connectors have part-numbers like
***-16-26S and are available from Amphenol, ITT
Cannon and other manufacturers.
Pin Function
Pin Function
A Velocity, non-inverting – Z
P Calibration signal (all channels)
B Velocity, inverting – Z
R Calibration enable (all channels)
C Velocity, non-inverting – N/S
S Inclinometer output - X
D Velocity, inverting – N/S
T Inclinometer output - Y
E Velocity, non-inverting – E/W
U Centre
F Velocity, inverting – E/W
V
not connected
G Mass position – Z
W Unlock
H Hole-lock motor
X Lock
J Mass position – N/S
Y Digital ground
K “Busy” LED
Z Inclinometer power
L Mass position – E/W
a
not connected
M
not connected
b
Power supply 0 V
and
Hole-lock motor return
N Signal ground
c
Power supply: +ve (12-24 V DC)
Wiring details for the compatible socket, ***-16-26S,
as seen from the cable end (
i.e.
when assembling).
71
Issue G - November 2019
