Installing the 3TB in a borehole
A WaveView window will open displaying your recorded streams:
2. Drag the streams across the window so that the reference stream is at the top,
the N stream in the middle, and the E stream at the bottom.
3. Locate a suitable data range. A good range would contain lots of teleseismic
events and very little local noise. You should use a period of at least an hour,
and preferably much longer.
4. Hold down
and drag across the WaveView window with the left mouse
button until all three streams are selected for the whole range. Make sure
there are no gaps in the data you select. If gaps are present in any streams,
the selection for those streams will be shown with hatched lines to alert you:
42
Issue G - November 2019
