8
the water below the ice, the unit will not work properly and will require you to try another
spot, or cut a hole in the ice to use.
4. To remove the sonar sensor from the frozen ice, gently tap the sonar sensor at the base
with your hand. If it does not come loose, spray a small amount of water around the sensor
surface and ice and repeat step 4 until the sonar sensor is easily removed.
Warning:
Never use a blunt object to strike the sonar sensor as this may cause damage to
the sensitive internal electronic components.
Note:
Due to various environmental conditions, this process may not work in all situations.
Boat Fishing
There are three methods that the fish finder can be used from a boat.
1. Toss the sensor and float into the water as per the previous instructions.
2. “Shoot Thru” the hull according to one of the instructions as follows.
a) Place the sonar sensor in .5 inches of water against the hull bottom.
b) Coat the face of the sonar sensor with petroleum jelly, then press it
against the hull bottom with a twisting motion.
Содержание NAKI8800
Страница 1: ......
