7
cable neatly.
Note:
To remove the Sonar Sensor Float, remove the rubber stopper first, then slide the
cable through the center of the float toward the plug and gently work the plug through the
center of the float in a rocking motion. To add, reverse the steps above.
Note:
Do not allow the cable to sink to the bottom as it may become
entangled in debris.
Ice Fishing
To find out a right point for ice fishing is a difficult matter. But using our fish finder will
make it very easy. To achieve the best performance for ice fishing, it is highly recommended
that you cut a hole through the ice and place the sonar sensor directly in the water. However,
you can avoid hassle of cutting hole after hole by checking the area for depth or fish with
our fish finder in advance, please follow steps 1- 4 precisely.
1. Clear away snow to expose the ice surface, making sure the surface is
smooth.
2. Place a small amount of liquid water on the ice and set the sensor on the
water allowing the unit to be frozen to the ice.
3. If there are any air pockets between the sonar sensor and ice, or
Содержание NAKI8800
Страница 1: ......
