Guntermann & Drunck DVI-Vision-Fiber-AR, Инструкция по установке и эксплуатации

Страница: 107 / 152

Configuration
G&D DVI-Vision-Fiber · 28
English
Basic operation of the web application
The Config Panel web application provides a graphical user interface to configure and
monitor the KVM extender.
The web application uses the Java Web Start technology. This technology allows the
execution of the Java application, regardless of the settings and the Java compatibil-
ity of the web browser.
Starting the web application
How to start the
Config Panel
web application:
1. Enter the following URL in the address bar:
https://[IP address of the user or computer module]
2. Click on Download Config Panel .
Security advice for web browsers
The KVM extender stores an SSL certificate, which enables the user or the web
browser to authenticate the opposite site.
NOTE: The separate manual provides information about system requirements, the
required configuration of the network interfaces at the DVI-Vision-Fiber devices and
the operation of the web application.
NOTE:
You can also start the web application via http connection (port 80). In this
case it is not possible to authenticate the opposite side via certificate.
IMPORTANT:
Replace the certificate that is included in the defaults of the device
with an individual certificate, which is related to the device. Information on how
to create such a certificate is given in the separate manual of the web application.