Guntermann & Drunck DVI-Vision-Fiber-AR, Инструкция по установке и эксплуатации

Страница: 100 / 152

Operation
21 · G&D DVI-Vision-Fiber
 Right for exclusive access to the console
on page 35
 Changing the video mode of consoles
on page 36
 Changing the exclusive key
on page 33
Switching power outlets
A compatible power switch (
ePowerSwitch 1G R2
,
4M+ R2
and
8M+ R2
) lets you switch
the power supply of devices by using the KVM extender.
How to switch the power outlets assigned to the KVM extender:
1. Use the hotkey Ctrl+Num (default) to open the on-screen display.
2. Use the arrow keys to select the row Target Power .
3. Press
Enter
to carry out one of the following options:
turn off
 turn power outlet(s) off
turn on
 turn power outlet(s) on
ADVICE: In the standard configuration of the KVM extender, the computer’s
video signal is output at the active as well as the concurrent console monitor.
If necessary, change the video modes of the user modules (see page 36) to switch
off the image of the concurrent console while you operate the extender at the
other console.
IMPORTANT: The configuration of power switches and the assignment of power
outlets is carried out in the web application Config Panel .
NOTE: If the computer module is not assigned with at least one power outlet,
this entry cannot be selected and the text
n.c.
(not connected) is shown instead.