Guntermann & Drunck DVI-Vision-Fiber-AR, Инструкция по установке и эксплуатации

Страница: 112 / 152

Configuration
33 · G&D DVI-Vision-Fiber
Changing the exclusive key
After pressing the hotkey for the exclusive operation of the extender the input
devices of the concurrent console are disabled. Only after pressing the hotkey again
at the active console the KVM extender can again be operated by both consoles.
The hotkey for the exclusive operation consists of at least one hotkey modifier (see
Changing hotkeys on page 30) and an exclusive key. Both keys can be selected from a
number of available keys. You can change both the hotkey modifier Ctrl and the
exclusive key Print .
How to change the exclusive key:
OSD
1. Press Ctrl+Num (default) to open the on-screen display.
2. Select the row System setup and press Enter .
3. Select the row Hotkey and press Enter .
4. Under Exclusive key press F8 to select on of the following options:
Backspace  Backspace key
PrtSc  Print key ( default )
Scroll  Scroll key
Num  Num key
Pause  Pause key
Insert  Insert key
Delete  Delete key
Home  Home key
End  End key
PgUp  Page Up key
PgDn  Page Down key
Space  Space key
5. Press F2 to save your settings.
Config
Panel
1. Click on
KVM Extenders > [All Extenders]
on the directory tree.
2. Double-click the computer module of the KVM extender to be configured.
3. Click the
General
tab.
4. Under
Exclusive mode actionkey
select one of the following keys:
Backspace
,
PrtSc
,
Scroll
,
Num
,
Pause
,
Insert
,
Delete
,
Home
,
End
,
Page Up
,
Page
Down
and
Space.
5. Click
OK
to save your changes.