Guntermann & Drunck DVI-Vision-CAT series, Инструкция по установке и эксплуатации

Страница: 91 / 148

Installation
G&D DVI-Vision-CAT · 14
English
Connecting an additional interface of the CON-2 variants
Transmission 2: Plug a category 5e (or better) twisted pair cable, which is available as
accessory, into this interface. Connect the other end of the cable to the respective
interface of a compatible computer module or matrix switch.
Establishing the power supply
Main Power: Insert one of the supplied IEC cables here.
Red. Power: To provide a second, redundant power supply, connect a portable power
pack to this interface.
NOTE:
With the also available CON-2 versions of the user modules, you can con-
nect a console to two different digital extenders of the Vision series.
Alternatively, you can connect a compatible matrix switch to each of the two
channels instead of a digital extender.
Micro In Speaker
RS232
Main P
ower
DVI/VGA Out Red. Power
Mouse
Keyb.
Generic
Keyb./Mouse Transmission 1
Transmission 2 USB Devices
RS232
DVI/VGA Out
Mouse
Keyb.
USB 2.0 Devices
Micro In Speaker
Generic
Keyb./Mouse
Transmission
USB 2.0 Trans.
Main P
ower
Red. Power