Guntermann & Drunck DVI-Vision-CAT series, Инструкция по установке и эксплуатации

Страница: 116 / 148

Configuration
39 · G&D DVI-Vision-CAT
How to configure the Freeze mode:
OSD
1. Press
Ctrl+Num
(default) to open the on-screen display.
2. Select the row
Console setup
and press
Enter
.
The Freeze mode is adjusted separately for each video channel of the user module. The
following options can be adjusted separately for each video channel of multi-channel
devices.
3. Under
Freeze mode
press
F8
to select on of the following options:
off
 Freeze mode is disabled (
default
)
on
 Freeze mode is enabled
4. If the
Freeze
mode is active, press
F8
to select one of the options available
under
Freeze visualization
:
frame
 shows a coloured frame when disconnected
OSD
 shows
Frozen
and the time passed since disconnection
frame+OSD
 shows a coloured frame (
frame
) and
Frozen
(
OSD
)
5. Press
F2
to save your settings.
Co
nf
ig
Pan
el
1. In the menu, click on KVM extender .
2. Click on the KVM extender you want to configure and then click on Confi-
guration .
3. Click on the tab Video channels .
4. When using a multi-channel device, click on the desired video channel and
then click on Configuration .
5. In the Freeze mode field, select one of the following options:
Off  Show no image if the connection is lost (default).
On | OSD timer + frame  Display of a coloured frame in case of a
disconnection as well as display of the warning
Frozen and the time elapsed since the
disconnection.
Frame  A disconnection is indicated by a coloured frame.
OSD  Display of the warning Frozen and the time elapsed
since the disconnection.
6. Click on Save .