The DP-Vision-IP series
G&D DP-Vision-IP ·
2
English
The DP-Vision-IP series
KVM extenders of the
DP-Vision-IP
series consist of a computer module and a user
modules.
Connect the computer to be operated as well as an optional console to the computer
module (
DP-Vision-IP-CPU
). The remote console is connected to the user module
(
DP-Vision-IP-CON
).
Both the computer and the user module are connected via category 5e (or better)
twisted pair cables over an IP-based Gigabit Ethernet.
When observing the max. length of sections between two
active
network components
(up to 100 meters each), the entire transmission length is unrestricted.
G&D’s
KVM-over-IP™
technology makes it possible to transmit signals between the
computer and the user module compressed and encrypted (AES-128) using Gigabit
Ethernet (Layer 3).
If the bandwidth of the Gigabit Ethernet is sufficient, the video signal is reproduced
in a loss-free video quality and almost without any latency. By means of manual
bandwidth management you can adapt the transmission to different bandwidth
requirements (see
The computer can either be operated at the remote console of the user module or at
the local console of the computer module.
NOTE:
You can also use category 5e (or better) twisted pair cables to establish a
direct connection between computer module and user module.
IMPORTANT:
Data transmission of devices of the
DP-Vision-IP
series is
not
compati-
ble to G&D devices of other series!
