User module »DVI-CON-2«
76
· Target and user modules
Connection to the matrix switch
Transmission 1:
Connect this interface to a
Dynamic Port
(RJ45) of the matrix switch.
Transmission 2:
Connect this interface to another
Dynamic Port
(RJ45) of the matrix
switch.
Power supply
Main Power:
Connect the power cable to the power pack and a power outlet.
Red. Power:
If required, connect the power cable of the optional power pack to this
interface. This provides a redundant power supply. Connect the power cable with
the power pack and a power outlet of a different power circuit.
Start-up
Start the user module by pressing the
Main Power
button of the power pack.
Switching
The buttons on the front panel of the user module or configured key combinations
(
select keys
) let users switch between the connected matrix switches.
How to switch channels via buttons:
Press the button of the desired channel to activate it.
How to switch channels via key combinations:
On the console keyboard, press
Select key
.
In the default settings, the select keys are
Alt+1
(channel 1) and
Alt+2
(channel 2).
NOTE:
Use category 5e (or better) twisted pair cables to connect the devices.
ADVICE:
You can also connect the
Transmission
interface
directly
to a compatible target
module.
ADVICE:
The active hotkey configuration is displayed during the
System Startup
of
the matrix switch.
Содержание DP-CON
Страница 123: ...NOTES...
