Configuration
Target and user modules ·
117
Enable/disable the startup without a keyboard
By default, user modules start without a keyboard. As an alternative, the user mod-
ule can interrupt startup by showing a message regarding the missing keyboard.
Once you connect a keyboard to the user module, the startup process continues.
How to enable/disable the startup of a user module without a keyboard:
1. Press the
Alt+Num
(default) hotkey to open the on-screen display.
2. Select
Keyboard/Mouse
and press
Enter
.
3. Select the
Keyboard required
entry and press
F8
to select one of the following
options:
4. Press
F2
to save your settings.
Activating or resetting a PS/2 mouse
Compared to USB mouses, PS/2 mouses do not support hot plug technology. You
can therefore insert the PS/2 plug during operation, but it may be possible that the
computer does not detect the input device.
In order to activate or reset the PS/2 mouse, the matrix system can be used to send
a special command to the computer connected to the target module.
How to start and use the
Mouse utility
function:
1. Press the
Alt+Num
(default) hotkey to open the on-screen display.
2. Select
Mouse utility
and press
Enter
.
3. Select one of the following functions and press
Enter
:
no:
User module can be started without a keyboard (default).
yes:
User module can be started only when a keyboard is connected.
NOTE:
Since the commands differ depending on the used mouse type and the
installed operating system, four different functions are provided.
Reset Mouse:
Resets the PS/2 mouse interface of a Windows
computer
Enable mouse (for Unix):
Activates the PS/2 mouse of a Linux computer
Enable Intelli:
Activates the PS/2 wheel mouse of a Linux computer
Enable Intelli-Explorer:
Activates the PS/2 wheel mouse with additional
keys of a Linux computer
Содержание DP-CON
Страница 123: ...NOTES...
