Guntermann & Drunck CATpro2-DVI-Audio-UC-USB, Руководство по установке

Страница: 27 / 32

Power supply via Power Loop cables
G&D CATpro2-DVI-Audio-UC-USB · 10
Power supply via Power Loop cables
If the optional AC adapter which is connected to the Power In interface is used to
supply the CATpro2-DVI-Audio-UC-USB target module with power, up to three fur-
ther target modules can be supplied with power via Power Loop cables.
1. Connect the AC adapter  to one of the target modules.
2. Insert a Power Loop cable  into the Power Loop interface of this target module.
Connect the other end to the Power In interface of the next target module.
3. If desired, repeat step 2 to establish the power supply to the third and fourth tar-
get module.
Figure 4: Four devices supplied with power by one AC adapter via Power Loop cables
Def.
1
5
3
7
2
4
6
Learn
User
DDC Trans. 1 Trans. 2
Def.
1
5
3
7
2
4
6
Learn
User
DDC Trans. 1 Power In Trans. 2
Def.
1
5
3
7
2
4
6
Learn
User
DDC Trans. 1 Power In Trans. 2
Def.
1
5
3
7
2
4
6
Learn
User
DDC Power Loop Trans. 1 Power In Trans. 2
Loop Power
Loop Power
Loop Power
In Power



