Guntermann & Drunck CATpro2-DVI-Audio-UC-USB, Руководство по установке

Страница: 24 / 32

Selecting DDC information
7 · G&D CATpro2-DVI-Audio-UC-USB
Selecting DDC information
Since the monitor is connected to the user module and not directly to the graphic
output of the computer, the computer cannot access the DDC information of the
monitor.
For this reason, preset DDC information that are provided to the computer are
stored in the CATpro2-DVI-Audio-UC-USB target module. Additionally, the DDC
information of the monitor can be read out and stored in the target module.
Preset DDC information
In the default setting of the CATpro2-DVI-Audio-UC-USB target module the DDC
switch is moved to the Def. position.
The following table lists different switch settings and the respective DDC information:
Figure 3: Detailed view of the DDC switch
Switch setting DDC information
Def. Default (all resolutions possible)
1 1280 × 1024 Bildpunkte, 60 Hz (DMT)
2 1024 × 768 Bildpunkte, 60 Hz (DMT)
3 1600 × 1200 Bildpunkte, 60 Hz (DMT)
4 1920 × 1200 Bildpunkte, 60 Hz (CVT-RB)
5 1920 × 1080 Bildpunkte, 60Hz (CEA)
6 1680 × 1050 Bildpunkte, 60 Hz (CVT)
7 1440 × 900 Bildpunkte, 60 Hz (CVT)
Learn Read DDC information out
User Use a monitor’s read-out DDC information
DDC Power Loop Trans. 1 Power In Trans. 2
Def.
1
5
3
7
2
4
6
Learn
User