Guntamatic BIOSTAR BOX, Руководство по эксплуатации

Страница: 38 / 48

38
9 CLEANING/ CARE
BS-02
Attention: Danger of injury!
For safety reasons you must only carry out
servicing and cleaning when the heating
system is switched off and disconnected from
the mains, and has cooled down
Attention: Danger of live!
Servicing work inside the fuel storeroom must
only be carried out under the supervision of a
second person, who must be outside the
storeroom.
boiler The sophisticated cleaning system on a GUNTAMATIC heating
system means that regular cleaning work is substantially reduced.
All that is required is regular emptying of the ash.
The flue must be regularly swept. At the same time, the flue
connecting pipe, the flue gas box and the boiler heat exchanger
should be cleared of fly-ash.
Depending on the load on the heating system, complete cleaning
– for which the precise procedure is described in the section
"Complete cleaning" – may be required twice a year but should be
carried out at least once a year.
Depending on efficiency, and on ash production you have to lead
interim and general cleaning, this Stepps are descriped here.
If the heating system is subject to exceptionally high loads, more
extensive cleaning may be required.
Cover panel If there are any Contamination on the cover panel parts and the
control elements, you have to eliminate them with a wet rag. For
wetting you have to use just solvent free, mild cleaning supplies.
Don´t use any cleaning supplies like alcohol, cleaner´s solvent or
diluter, cause these cleaning methods could be aggressive and
could attack the construction´s surface.
fuel store The fuelstoreroom and the auger feed´s spiral has to be emptied
minimum all 3 years completely (if necaceserry you have to
exhaust it), to suspend any Errors on the Feedsystem through
sediments.