Guntamatic BIOSTAR BOX, Руководство по эксплуатации

Страница: 36 / 48

36
8.3 FILL THE STOREROOM
01
The fuel store can´t be filled when the heater
is in service!
Minimum 1 hour before filling, the construction
should be turned off!
You have to empty the feed spiral
minimum all 3 years!
You have to suct bigger dust quantity!
Firstfilling/ Refilling Before first fillimng and after every complete emptying of fuil the
storeroom couldn´t filled completly. The discharge screw should
be filled prior to complete filling of the fuel storage over the entire
screw length about 10 cm high with pellets. Thereafter, the fuel
storage can be filled up to the maximum fill height.
dumping height Pellets ........................................ max. 2,5 m
Emergency filling If the automatically refilling of pellets isn´t able to run, the store
room could be “emergency refilled”:
Before you try to eliminate the error follow the description as you
can see in the chapter „Rectifying faults“ or „Replacing fuse“.
approach:
Put he construction to „programme out“and wait till it went to „run
out“. Putt he power switch to „0“. Screw the store tunk in above
direct and screw it and fill it with bagstuff.
After that, you have to close the dished cover. The shown
allertmessage should be receipted. After that you have to attend
the at least used heatingprogramme
Hooper Open the hooper The Machine recognices this and turns the
hackchipsspiral off. Turn the ID Fan to the full drive. The container
could be filled up to the seal border. Close the Container lid and
lock it tightly. The Service will be leaded out automatically. Once
a year the Operation will be completed emptied and the dust
sediments should be suct completely.