Gunnebo GlasStile GSR, Инструкция по установке, эксплуатации и обслуживанию

Страница: 6 / 42

6
.............................
CCEC/ OM Manual GlasStile GSR 1.6 EN 07 .2009
Changes
No hardware or software changes may be made without authority from Gunnebo who will be
responsible for ensuring that the proposed change is acceptable in all safety aspects. Only
personnel authorised by Gunnebo may make changes.
Any maintenance or modification of Emergency Stop and Guarding Circuitry must be followed
by safety checks on the whole hardwired Emergency Stop and Guarding Circuitry.
Prior to a hardware change, records must be made of the change, one of which MUST be sent
to the Technical Department at Gunnebo.
Rotating Machinery
Rotating industrial machinery may possess huge amounts of stored energy. On no account
must you commence maintenance if you do not fully understand what you are doing and/or
have not taken all the safety precautions normally associated with industrial electronic control
systems and machines.
Before starting work on the equipment, please make yourself familiar with all the system sub-
assemblies, including control loops, mechanics, drives, transducers and electric circuits. Please
read this Manual if you are unfamiliar with the equipment before you commence work.
Warnings, Cautions and Notes
Where necessary within this technical manual, Warnings, Cautions and Notes may be given.
Warnings
Are for conditions that might endanger people. The instructions given in Warnings must be
followed precisely. They are given to avoid injury or death.
Cautions
Are for conditions that may cause damage to equipment, or may spoil work. The instructions
given in Cautions must be followed to avoid spoilt work or damage to equipment.
Notes
Alert the user to pertinent facts and conditions.
Static Sensitive Devices
The PCB in the equipment covered by this Technical Manual contains Static Sensitive Devices.
It is recommended that maintenance and service engineers are fully aware of the Local Industry
Regulations and procedures when handling such devices.