Gumstix Overo, Руководство по установке трубопровода

Страница: 6 / 10

– Europe: 868MHz, 434MHz
Gumstix provides various kits for the Overo Conduit and Gumstix Pi Conduit gateways that include many of the required
components at
store.gumstix.com/kits.html
for North American and European regions.
In addition to the hardware listed above, you will also require an account on TheThingsNetwork (TTN) and a gateway
configured in your TTN console.
3 Setup
3.1 Hardware
Assemble the equipment as shown:
1. Snap the Overo COM onto the board.
Take care to align the COM with the outline on the board. This has the COM’s microSD slot facing outward.
Figure 4: COM placement and orientation
2. Connect the RHF0M301 module to the 24-pin connector on the board’s backside.
Use risers to keep the module’s pins from bending during use.
4