Gulf Coast Spas LX 11000, Руководство пользователя

Страница: 30 / 52

28
Error Codes
CODE DESCRIPTION CORRECTIVE ACTION
bL Er
CP Er
O3 Er
P1 Er
P2 Er
P3 Er Device not
detected
Air-locked
pump
•
Open the access panel to spa pack
and reseat corresponding plug (see
callouts on page 39)
•
Reset GFCI breaker
•
Reset Br and LL settings (see page 39)
•
Bleed air from system (see page 35)
Rh HL Water high
limit temp.
exceeded
•
Add cold water to spa (see Filling Your
Spa on page 16)
•
Turn on Pump 1 to circulate water
•
Shade spa from intense direct sun with
Gazebo or other structure
Rh nC Topside
Control
Panel not
connected
•
Open the access panel to spa pack
and reseat small orange “C” plug
•
Remove red “Rh” plug and check for
bent pins – remove red collar
•
Reset GFCI breaker
Rh nf Water not
flowing • Check for closed jets and closed slide
valves on heater and pumps
•
Check for dirty filter/plugged return line
•
Check for proper water level (see Filling
Your Spa on page 16)
•
Close air control valves
Rh nH No heat
•
Open the access panel to spa pack
and reseat both red heater plugs
•
Reset GFCI breaker
•
Reset Br and LL settings (see page 39)
SP br Improper BR
setting Administer BR current to proper setting
(see
Low-Level Settings on page 39)
SP F1 F1 blown Change F1 (Buss Fuse Class G #SC-20)
SP F2 F2 blown Change F2 (Buss Fuse Class G #SC-30)
SP F3 F3 blown Change F3 (Buss Fuse Class G #SC-30)
SP Hr Internal
hardware
error
•
Reset circuit breakers on GFCI panel
and main circuit breaker panel
•
Turn on/off all pumps and accessories
SP in Input
voltage low
•
Check incoming voltage to GFCI
•
Check incoming voltage to spa pack
SP OH Water
temperature
overheat Open the spa cover and add cold water
through the filter