22
W a t e r M a n a g e m e n t
Gulf Coast Spas offers an optional enzyme-
based water purification system for your spa.
AquaClara Natural
naturally solves most spa
water treatment problems and dramatically
reduces spa maintenance.
Added monthly, it effectively stabilizes pH/alkalinity, eliminates
scum lines, foam, itching and rashes and helps to alleviate dry skin,
by reducing overall chemical use. Below are some answers to
common water chemistry questions.
pH
– It is common to have pH fluctuations after adding chemicals
and while AquaClara Natural conditions your spa. Let your jets run
and give your water time to stabilize. 9 times out of 10, your pH will
come back into the 7.2-8.2 range on its own.
Mildew on cover
– Mildew usually grows in the folds and seams of
your cover and then drips into your spa water causing cloudiness
and/or odor. Clean with our special non-foaming Shell Cleaner
and then rinse the inside of your cover with clean warm water.
Foamy water
– Foam typically results from soap residue on your skin
and hair, or laundry detergent residue on clothing. Take a soapless
shower and rinse all clothing in warm water prior to bathing.
CLEAR green/brown water
– Your “source water” most likely has
dissolved heavy metals. When this is the case, use a respected
brand of demineralizer found at any local pool/spa store. Using
the AquaClara Pre-filter [included with some spas and available
by calling (727) 573-9888] can remove these contaminants before
they get into your spa (see
Filling Your Spa
on page 16).
CLOUDY green water
– Algae can be resolved by adding a
respected brand of algaecide and 2 ounces of Clara Boost.
Odor and/or cloudy water
– If your water develops an odor and/or
cloudiness, clean your cover and filters, turn your filtration cycle up
and add two AquaClara Tablets. AquaClara Natural’s
effectiveness is increased by air being drawn into the water. You
can accelerate the rate at which AquaClara Natural performs by
increasing the amount of time your spa filters per day.
Heavy Use
– After a period of heavy use, your spa may cloud.
Shock your spa with 2 ounces of Clara Boost and wait 36 hours.
Содержание LX 11000
