Guldmann Stepless LP7 Скачать руководство пользователя страница 12

Страница: 12 / 16

n GB/US-2583/04/2022 • # 558526_3

5 .00

Servicing and useful life

5 .01

Useful life and servicing

The LP7 & LP7+ must be inspected in accordance with the national law and

at least twice a year.

Attention:

Please note that there can be specific demands if there is public

access to the lifting platform.

• The LP7 & LP7+ have an expected life span of 15 years with regular daily

use.

• The lifting actuator must be replaced after 10 000 lifts.

The life span is based on correct usage, cleaning, and maintenance, as

well as two annual inspections and maintenance by qualified personnel or the

Guldmann Service Team. After this period, the LP7 & LP7+ must be assessed

by qualified personnel before future use.

Spare parts lists and drawings can be ordered from the manufacturer or the

distributor.

5 .02

General inspection

Please refer to the “Safety inspection checklist for Lifting platforms” and “Ser-

vice inspection checklist for Lifting Platforms” for information on general

inspection.

Содержание Stepless LP7

















Результаты поиска

Содержание Stepless LP7

Отзывы:

Похожие инструкции для Stepless LP7

Бренды по названию

Популярные бренды

Guldmann Stepless LP7, Руководство пользователя

Результаты поиска

Содержание Stepless LP7

Отзывы:

Похожие инструкции для Stepless LP7

Бренды по названию

Популярные бренды