background image

© G

ul

dm

an

n GB/US-2583/04/2022 • # 558526_3

© G

ul

dm

an

n GB/US-2583/04/2022 • # 558526_3

9

The emergency lowering must be used in emergencies only. This requires 

qualified assistance. 

You must contact the dealer before using the LP7 & the LP7+ again. Remove 

the key after installation and keep it with the manual.

The electric emergency lowering device is activated by turning the key switch 

to the left for 10 seconds. The lifting platform will then begin its descent. The 

lifting platform will stop if the key is released. If the key is not activated for 10 

seconds, the electrical emergency lowering device will be deactivated, after 

which it can be activated again.

The switch is located in the left tower on the lifting platform.

Description of emergency lowering – access ramp

 

The access ramp is fitted with a 

hexagonal screw on the left side. 

Remove this screw and the access 

ramp can be closed up.

Important!

When the screw is removed from the 

access ramp, the ramp can no longer 

be secured. Hold onto the access 

ramp when removing the screw.

Safety curtain

The safety curtain ensures that nobody can move beneath the lifting platform 

when it is at its high est level and thereby risk getting trapped when the lifting 

platform is lowered. The safety curtain is fitted upon delivery.

If the safety curtain has not been installed, or if it is damaged and the area 

beneath the lifting platform cannot be accessed, the lifting platform cannot be 

used until the problem has been solved.

Содержание Stepless LP7

















Отзывы: