Guldmann Stepless LP50, Руководство пользователя

Страница: 4 / 16

4
©
G
ul
dm
an
n GB-1559/01/2018 • # 551752
©
G
ul
dm
an
n GB-1559/01/2018 • # 551752
1 .03 Important / warnings
• All of the operating instructions must be read before the product is used.
• The LP50 / LP50H must be assembled by the Guldmann Service Team, or by
an engineer approved by Guldmann.
• The lifting platform is controlled by a microprocessor print which can be dam-
aged by static electricity if touched without the necessary precautions. The
electronics must therefore be serviced by trained technicians only.
• The accompanying safety chain must be used when the service engineer
moves around beneath the lifting platform.
• The max. load must not be exceeded.
• The lifting platform must be swept clean of gravel, fallen leaves, snow, etc.
before use.
• The lifting platform is to be used to transport people only, and must be used
in accordance with the descriptions in this manual.
• The brakes of the user’s wheelchair or similar must be applied.
• All playing by and with the lifting platform is forbidden.
• A simple and usable “Emergency procedure” must be described and agreed
between the user and the helper. This must ensure that the user does not
become trapped on the platform in the event of an electrical or a mechanical
failure.
• The lifting platform must not be used during fire.
• Safety equipment must only be reset by qualified assistance.
• Make sure that the area in front of the lifting platform is free.
• After use ensure that the lifting platform is in its lowest position and check
that the safety edges are completely down before leaving the lifting platform.
1 .04 Safety rules
When working beneath the platform, there is a risk of becoming trapped
between the moving parts of the platform. The following safety rules must
therefore be observed:
1. The safety chain/strap must always be used while working beneath the platform.
2 The lifting platform must NOT be raised/lowered while work is going on beneath
the lifting platform. This applies even if the safety equipment is installed.
3 When the lifting platform is assembled and connected so that it can be raised/
lowered, only one person may work on it.
Safety equipment
When working beneath the platform, the
safety chain/-strap MUST be used.
The safety chain/strap is fitted between
the safety eyelets on the scissors or the
two central tubes of the scissors as illus-
trated on the picture.
When the chain/strap has been fitted,
lower the platform until the chain is taut,
i.e. until the traction wheel ”releases”
the curve.