background image

3

1 .00 

Purpose and use

1 .01 Manufacturer

V. Guldmann A/S

Graham Bells Vej 21-23A

DK-8200 Aarhus N

Tel.  +45 8741 3100

Fax  +45 8741 3131

1 .02 

Purpose and use

Purpose

LP11 - Side Exit is a mobile lifting platform with a side exit specifically concei

-

ved for the narrow environments that can be used to negotiate height differen-

ces between a platform and a train. It is designed to lift wheelchair users and 

other persons with impaired mobility where the support is plane and stable.

LP11 is also suitable for those places with height differences where a mobile 

lifting platform is the preferred option for meeting the need for lifting of wheel-

chairs, e.g. podiums, stages etc.

Prerequisite

The LP11 - Side Exit lifting platform must not be used before reading this 

manual.

Use

The lifting platform is intended to lift persons with impaired mobility – and is 

not for transport.

The platform is intended to be used parraell with the train.

1 .03 Important/warnings

•  The lifting platform’s recommended load of 300 kg must not be exceeded.

•  The lifting platform may only be used to lift persons with impaired mobility.

•  The lifting platform may only be used on an even surface.

•  Always brake the lifting platform on lifting and lowering.

•  During use persons must not stand immediately adjacent to the lifting platform.

•  Do not run into people or objects with the lifting platform.

•  The platform must be lowered to its lowest position when being moved.

•  The train must be stationary when the lifting platform is in use.

© 

Guldmann

 GB

-2253

/06

/18 • # 944137

© 

Guldmann

 GB-

2253

/06

/18 • # 944137

Содержание Stepless LP11

















Отзывы: