Gulbransen Digital Hymnal DH-200, Руководство пользователя

Страница: 4 / 40

4
DH200 Manual
Rev 16.0
Instructions on this page will give you a quick way to try out you Hymnal.
POWER ON — The Hymnal will power on automatically each time it’s plugged into a live
AC wall outlet. If it’s already connected to power just tap the POWER button. New batteries
should be charged for at least 4 hours before use. Once the internal battery is fully charged the
Hymnal will operate remotely from its on-board nickel metal hydride rechargeable battery.
DEMO — To play the Gulbransen demonstration series of hymns, push the remote control’s
DEMO
button. Or, from the front panel, press and hold the © button and press STOP/INTRO.
Push the Hymn up (

) button on the remote control to skip to the next demo song.
PLAY — Select hymn 413 from the master hymn list by pushing

,

,

, and
PLAY
.
or
INTRO — Play the hymn with an introduction by pressing INTRO instead of PLAY .
TRANSPOSE — Change the “key” of the hymn up or down in half-steps using the
TRANSPOSE
buttons.
TEMPO — Change the playback tempo with the
TEMPO
controls. Try the Tap-A-Tempo
function by tapping the

button on the front panel (not on the remote control) at the tempo
you desire. This will prompt the Hymnal to follow along at the rate you dictate. The Tap-A-
Tempo function usually needs about 3 or 4 taps to accurately estimate the tap input.
VOLUME — Turn the volume up and down with the
VOLUME
controls.
PAUSE — Temporarily stop the playback of a hymn by pushing
PAUSE
. The hymn will be
"on hold" until the
PAUSE
button is pushed again.
STOP — Bring the hymn to a complete stop and return to the main menu by pressing STOP .
POWER OFF — Press and hold the POWER button until the unit turns off.
Using the remote control:
VERSES — Select the number of verses. For example, set the number of verses to two by
pushing VERSES , 2, and

(Enter).
SOUNDS — Change the performance sound by pushing the CHOIR/CHOIR2 button once.
This selects the first choir sound. Push it again and a different choir will sing. Try
PIANO/
HARPSICHORD
and other sounds from the blue-shaded area on the remote.
STYLE — Listen to a different performance style. Select Style 42 by pushing
STYLE
,

,

,
and

(Enter). This means that Sound Preset code 2 (the "2" in "42") will play the parts with
the flute, string, choir, and pipe organ sounds. Arrangement Preset code 4 (the "4" in "42") tells
the Hymnal to play the melody up an octave in
MELODY , all four parts combined at pitch in
ACC. 1
and
ACC. 2
, and the bass line down an octave in
CONTRA
. Many styles are available
in the Digital Hymnal. See the section on Performance Styles.
AMEN — Add an Amen by pushing the AMEN button. An Amen will play at the end of the
last verse.
Conduct a new arrangement of an old favorite.

1 Digital Hymnal Quick-Start Tutorial