Customer Helpline 0333 3201989
8
Operating Instructions
4. HAMMER OR DRILLING CHANGE (SEE FIG D)
When drilling masonry and concrete choose the hammer position“ ” . When drilling
wood, metal, plastic choose the drill position “ ”.
To change between the hammer and drilling selection positions you must push the
locking button in before rotating the selector to the chosen position, ensuring that the
button springs back out to lock the selector when the chosen position is reached.
5. 2 SPEED GEARBOX CHANGE (SEE FIG E1, E2)
Choose position 1 (SEE FIG E1) for high torque/low speed range for large diameter
drill bits and screw driving. Choose position 2 (SEE FIG E2) for low torque/ High-speed
range for small diameter drill bits.
If the gears do not engage easily then rotate the chuck by hand to align the gears.
Never change the gears when the tool is rotating, wait until it has stopped.
The on/off switch is also a variable speed switch that delivers higher speed and torque
with increased trigger pressure. Speed is controlled by the amount of switch trigger
depression.
B
C
D
E1
9
