GUIDO RAYOS X NESTORET 5050, Руководство пользователя

Страница: 10 / 60

GUIDO RAYOS X, S.A.
NESTORET 5050
10
MAN-011
Feb. 01
Ed. 2 / Rev. 1
35% range, a flow of 3 l.p.m. is recommended.
When oxygen concentrations above 35% are
required, the tubing from the flowmeter should be
connected to the Up to 100% inlet and the 35% inlet
should be capped. Oxygen administered through this
inlet will produce concentrations in the incubator of
from 40 to Up to 100% depending on the rate of
flow. Oxygen concentrations should be checked and
the flow of oxygen increased or decreased until the
desired concentration has been reached.
When high oxygen concentrations are required, the
following steps should be taken:
•
The water reservoir should be filled with water to
the fill line.
•
Air filters should be clean.
•
the vents on the sides of the hood should be closed.
CAUTION: DO NOT USE CONVENTIONAL OILS AND
GREASES IN OXYGEN SERVICE EQUIPMENT BECAUSE OF
POTENTIAL FIRE HAZARD. USE SPECIAL OXYGEN
SERVICE LUBRICANT.
WARNING: O
XYGEN CONCENTRATIONS HIGHER THAN
40%
CAN INCREASE
THE RISK OF RETROLENTAL FIBROPLASIA
(
RETINOPATHY OF PREMATURITY
). I
T
IS PROBABLE THAT EVEN CONCENTRATIONS OF
40%
OXYGEN
(
FORMERLY
CONSIDERED SAFE
)
COULD BE DANGEROUS FOR SOME INFANTS
.
FLOW SETTING:
Set the flow at the approximate concentration rates stated here below
II.3 FRONT PANEL (DESCRIPTION AND FUNCTIONS)
II.4. HEATING PACK.
IMPORTANT: B
EFORE USING THE
I
NCUBATOR WITH A PATIENT
,
IT IS
3 L P M for concentration of 40 - 50%
5 L P M for concentration of 55 - 65%
10 L P M for concentration of 75 - 85%