Guideline Geo MALA MIRA HDR, Руководство пользователя

Страница: 13 / 19

13
A connector panel can be found on the rear of the antenna box. Here power, GPS, Ethernet etc.
are connected. Also see System set up section.
The System diode blinks while the MIRA HDR system is booting; it becomes constant once the
system is ready to connect to MIRAsoft HDR. The GPS diode will blink until the internal GPS
clock is ready to sync with the external GPS clock (to pair the GPS coordinates with GPR traces).
Note: When no connectors are connected, the protective caps of all the connectors MUST be
attached. This prevents dirt and moisture entering the antenna box and makes the system IP65
compliant.
Data acquisition software
The data acquisition software for the MIRA HDR system is called MIRAsoft HDR, a simple and
straight forward application designed to collect, view and save MIRA HDR data. For more
information, see the MIRAsoft HDR User Guide .
The computer or tablet used for measurements should be placed in a convenient position for
the operator to monitor progress whilst carrying out the measurements. An Ethernet cable is
used to transfer the measured data from the antenna box to the data acquisition computer or
tablet for storage and display in MIRAsoft HDR.
Note: It is highly recommended to use the provided Ethernet cable with IP-classed connector
housing to protect the connection from water and dirt ingress.
MIRAsoft HDR aids collection of data with a satisfactory overlap between swaths and will provide