background image

Page 3 of 13 

 

Important Safety Information 

WARNING

 

 

Read and understand all instructions. Failure to follow all instructions may result in serious injury 
or property damage. 

 

The warnings, cautions, and instructions in this manual cannot cover all possible conditions or 
situations that could occur. Exercise common sense and caution when using this power pack. 
Always be aware of the environment and ensure that the tool is used in a safe and responsible 
manner.  

 

Do not allow persons to operate or assemble the power pack until they have read this manual and 
have developed a thorough understanding of how it works. 

 

Do not modify this power pack in any way. Unauthorized modification may impair the function 
and/or safety and could affect the life of the product. There are specific applications for which the 
product was designed.  

 

Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger 
industrial equipment. There are certain applications for which this equipment was designed. It will 
be safer and do a better job at the capacity for which it was intended. DO NOT use this equipment 
for a purpose for which it was not intended. 

 

Industrial or commercial applications must follow OSHA requirements. 

 

WARNING

 

 

This power pack may contain chemicals known to the State of California to cause cancer, birth 
defects or other reproductive harm. 

 

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities 
contains chemicals known to the State of California to cause cancer, birth defects, or other 
reproductive harm. Some examples of these chemicals are: 

 

-

 lead from lead-based paints, 

 

-

 crystalline silica from bricks and cement and other masonry products, and 

 

-

 arsenic and chromium from chemically-treated lumber. 

 

Your risk from these exposures varies, depending on how often you do this type of work. To 
reduce your exposure to these chemicals: work in a well-ventilated area, and work with approved 
safety equipment, such as dust masks that are specially designed to filter out microscopic 
particles.  

 

Handling power cords on corded products may expose you to lead, a chemical known to the State 
of California to cause cancer and birth defects or other reproductive harm. Wash your hands after 
handling. 

 

WARNING

 

WORK AREA SAFETY 

 

Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well lit. 
Cluttered, wet, or dark work areas can result in injury. Using the power pack in confined work 
areas may put you dangerously close to other cutting tools and rotating parts. 

 

Do not use the power pack where there is a risk of causing a fire or an explosion; e.g., in the 
presence of flammable liquids, gases, or dust. The product can create sparks, which may ignite 
the flammable liquids, gases, or dust. 

Содержание 699784














Отзывы: